Canon EOS REBEL T7I, Wi-Fi (Wireless Communication) Function Instruction Manual

Page: 110 / 170

110
This is a Wi-Fi connection mode available when using an access point
compatible with WPS. In pushbutton connection mode (PBC mode), the
camera and the access point can be connected via Wi-Fi simply by
pressing the WPS button on the access point.

If multiple access points are active in the surrounding area, it may be
more difficult to establish a Wi-Fi connection. In such a case, try
using [
WPS (PIN mode) ] to establish a Wi-Fi connection.

Check the position of the WPS button on the access point in
advance.

It may take approx. one minute to establish a Wi-Fi connection.
1
Press the <
k
> button.
2
Select an item.

If the history (p.126) is displayed,
switch the screen with the <
Y
> <
Z
>
keys.

If the [ Wireless communication
settings ] screen is displayed, set the
Wi-Fi settings (p.12).

Press the <
W
> <
X
> or <
Y
> <
Z
>
keys to select an item, then press
<
0
>.

For [
z
] (Transfer imgs between
cameras), see “Connecting to
Another Camera via Wi-Fi” (p.61).

Depending on the selected Web
service, the [
Send to ] screen is
displayed. Select a destination
(p.123).
Establishing a Wi-Fi Connection with
WPS (PBC Mode)