Canon EOS REBEL T7 Basic Instruction Manual Download Page 86

Page: 86 / 164

Connecting the camera to a TV set is recommended to play back the
movies shot.

Set the Mode Dial to <



The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Focus on the subject.



Before shooting a movie, focus with
AF or manual focus (p.73-80).



When you press the shutter button
halfway, the camera will focus with
the current AF method.

Shoot the movie.



Press the <

> button to start

shooting a movie. To stop movie
shooting, press the <

> button

again.



While the movie is being shot, the [

]

mark will be displayed on the upper
right of the screen.



Sound will be recorded by the built-in
microphone.

Shooting Movies

Autoexposure Shooting

Recording movie

Built-in microphone

Summary of Contents for EOS REBEL T7





































































































































































Search results

Summary of Contents for EOS REBEL T7

Reviews:

Related manuals for EOS REBEL T7

Brands by name

Popular brands

Canon EOS REBEL T7, Basic Instruction Manual

Search results

Summary of Contents for EOS REBEL T7

Reviews:

Related manuals for EOS REBEL T7

Brands by name

Popular brands