Canon EOS REBEL T6iW, Instruction Manual

Page: 338 / 414

338
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn
IV: Operation/Others.
3
Custom Function Settings
K
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
increments than 1/3-stop increments.
C.Fn-2 ISO expansion
0: Off
1: On
When you set the ISO speed, you can set “ H ” (equivalent to ISO
25600) for still photos and “ H ” (equivalent to ISO 12800) for
movies. Note that if [ C.Fn-3: Highlight tone priority ] is set to [ 1:
Enable ], “ H ” cannot be set.
With setting 1, the exposure level will be displayed as shown below.