Canon EOS Rebel T6 Instruction Manual Download Page 160

Page: 160 / 326

160

Connecting the camera to a TV set is recommended to play back the
movies shot (p.226).

Set the Mode Dial to <



The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Focus on the subject.



Before shooting a movie, focus with
AF or manual focus (p.148-156).



When you press the shutter button
halfway, the camera will focus with
the current AF method.

Shoot the movie.



Press the <

> button to start

shooting a movie. To stop movie
shooting, press <

> again.



While the movie is being shot, the [

]

mark will be displayed on the upper
right of the screen.



Sound will be recorded by the built-in
microphone.

Shooting Movies

Autoexposure Shooting

Recording movie

Built-in microphone

Summary of Contents for EOS Rebel T6







































































































































































































































































































































Search results

Summary of Contents for EOS Rebel T6

Reviews:

Related manuals for EOS Rebel T6

Brands by name

Popular brands

Canon EOS Rebel T6, Instruction Manual

Search results

Summary of Contents for EOS Rebel T6

Reviews:

Related manuals for EOS Rebel T6

Brands by name

Popular brands