Canon EOS REBEL T6 (W), Wireless Function Instruction Manual, Page: 79 / 144

79
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.

Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.

It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].

Under the [
5
3 ] tab, set [ Wi-Fi/NFC ]
to [ Enable ], then select [ Wi-Fi
function ] (p.17).

If a screen for setting a nickname (for
identification) appears, register a
nickname (p.14).
2
Select an item.

Select [
q
] or [
l
], then press <
0
>.
 The camera’s <
k
> lamp will blink.
3
Select [Select a network].

Select [ Select a network ] and press
<
0
>.

Select [ OK ] and press <
0
> to go to
the next screen.
Connecting via WPS (PIN Mode)