Canon EOS REBEL T6 (W), Basic Instruction Manual

Page: 28 / 164

26
1
Remove the protective cover.

Detach the protective cover provided
with the battery.
2
Attach the battery.

As shown in the illustration, attach the
battery securely to the charger.

To detach the battery, follow the
above procedure in reverse.
3
Recharge the battery.
For LC-E10

As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E10E

Connect the power cord to the
charger and insert the plug into a
power outlet.
 Recharging starts and the charge
lamp lights up in orange.
 When the battery is fully recharged,
the full-charge lamp will light up in
green.

It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery’s remaining capacity.

For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take longer (up to approx. 4 hours).
Charging the Battery
LC-E10
LC-E10E
Full-charge lamp
Charge lamp