Canon EOS Rebel T5, Instruction Manual

Page: 194 / 342

194
The built-in flash and external Speedlite settings can be set with the
camera’s menu. You can use the camera’s menu to set the external
Speedlite function settings only if
an EX-series Speedlite compatible
with this function is attached.
The setting procedure is the same as when setting a camera menu
function.
Select [Flash control].
Under the [
z
1 ] tab, select [ Flash
control ], then press <
0
>.
X The flash control screen will appear.
Normally, set this to [ Enable ].
If [Disable] is set, neither the built-
in flash nor the external Speedlite
will fire.
This is useful when you only
want to use the flash’s AF-assist
beam.
3
Setting the Flash
N
[Flash firing]
Even if [ Flash firing ] is set to [ Disable ], if focus is difficult to achieve in low
light, the built-in flash may still fire a series of flashes (AF-assist beam,
p.96).