Canon EOS Rebel T5 Instruction Manual Download Page 156

Page: 156 / 342

Shooting Movies

156

You can freely set the shutter speed, aperture, and ISO speed for movie
shooting. Using manual exposure to shoot movies is for advanced
users.

Set the Mode Dial to <

The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Select [Movie exposure].

Press the <

> button and under

the [

] tab, select [

Movie

exposure

], then press <

Select [Manual].

Select [

Manual

], then press <

Set the shutter speed and
aperture.

To set the shutter speed, turn the
<

> dial. The settable shutter

speeds depend on the frame rate
<

•

: 1/4000 sec. - 1/60 sec.

•

: 1/4000 sec. - 1/30 sec.

To set the aperture, hold down the
<

> button and turn the <

dial.

Set the ISO speed.

Press the <

> button and press the

> <

> keys or turn the <

dial to select the ISO speed.

For details on the ISO speed, see the
next page.

Manual Exposure Shooting

>
<

> + <

Summary of Contents for EOS Rebel T5























































































































































































































































































































































Search results

Summary of Contents for EOS Rebel T5

Reviews:

Related manuals for EOS Rebel T5

Brands by name

Popular brands

Canon EOS Rebel T5, Instruction Manual

Search results

Summary of Contents for EOS Rebel T5

Reviews:

Related manuals for EOS Rebel T5

Brands by name

Popular brands