Canon EOS Rebel T5, Instruction Manual

Page: 120 / 342

120
Due to the lens characteristics, the four corners of the picture may look
darker. This phenomenon is called lens light fall-off or drop in peripheral
illumination and can be corrected. The default setting is [
Enable ]. With
JPEG images, the correction is applied when the image is captured. For
RAW images, it can be corrected with Digital Photo Professional (EOS
software, p.318).
1
Select [Peripheral illumin.
correct.].
Under the [
z
1 ] tab, select
[ Peripheral illumin. correct. ], then
press <
0
>.
2
Select the setting.
Check that [ Correction data
available ] is displayed for the
attached lens.
If [ Correction data not available ] is
displayed, see “Lens Correction Data”
on the next page.
Select [ Enable ], then press <
0
>.
3
Take the picture.
The image will be recorded with the
peripheral illumination corrected.
3
Correcting the Image’s Dark Corners
Correction disabled Correction enabled