Canon EOS Rebel T4i 18-135mm IS STM Lens Kit, Instruction Manual, Page: 281 / 372

281
w Printing
5
Set the date and file number
imprinting.
Set them if necessary.
Select <
I
>, then press <
0
>.
Set as desired, then press <
0
>.
6
Set the number of copies.
Set it if necessary.
Select <
R
>, then press <
0
>.
Set the number of copies, then press
<
0
>.
7
Start printing.
Select [ Print ], then press <
0
>.
With Easy printing, you can print another image using the same settings.
Just select the image and press the <
l
> button. With Easy printing, the
number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.283) will not be applied.
The [ Default ] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. Refer
to the printer’s instruction manual to find out what the [
Default ] settings
are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [
Print ].
If image tilt correction (p.283) is applied, it may take longer to print the
image.
To stop the printing, press < 0 > while [ Stop ] is displayed, then select
[ OK ].
If you execute [ Clear all camera settings ] (p.210), all the settings will
revert to their defaults.
COP
Y