Canon EOS Rebel T3, Basic Instruction Manual, Page: 290 / 486

w
Printing
206
4
Set the printing effects.
Set as necessary. If you need not set
any printing effects, go to step 5.
What is displayed on the screen
differs depending on the printer.
Select the option on the upper right
(circled in the screenshot), then press
<
0
>.
Select the desired printing effect, then
press <
0
>.
If the <
e
> icon is displayed brightly
next to <
z
>, you can also adjust
the printing effect (p.208).
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 208.
Printing Effect Description
E
On
The image will be printed according to the printer’s standard
colors. The image’s Exif data is used to make automatic
correc ions.
E
Off No automatic correction will be applied.
E
VIVID
The image will be printed with higher saturation to produce
more vivid blues and greens.
E
NR Image noise is reduced before printing.
0
B/W Prints in black-and-white with true blacks.
0
Cool tone Prints in black-and-white with cool, bluish blacks.
0
Warm tone Prints in black-and-white with warm, yellowish blacks.
z
Natural
Prints the image in the actual colors and contrast. No
automatic color adjustments are applied.
z
Natural M
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing
adjustments than with “Natural.”
E
Default
The printing will differ depending on the printer. For details,
see the printer’s instruc ion manual.