Canon EOS Rebel T3 Page 120 Basic Instruction Manual Download

Page: 120 / 486

Attaching and Detaching a Lens

To zoom, turn the zoom ring on the lens
with your fingers.

If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the
focus slightly.

While pressing the lens release
button, turn the lens as shown by
the arrows.

Turn the lens until it stops, then
detach it.

Attach the rear lens cap to the
detached lens.

About Zooming

Detaching the Lens

Do not look at the sun directly through any lens. Doing so may cause
loss of vision.

If the front part (focusing ring) of the lens rotates during autofocusing, do
not touch the rotating part.

Image Conversion Factor

Since the image sensor size is
smaller than the 35mm film
format, it will look like the lens
focal length is increased by
approx. 1.6x.

Image sensor size (Approx.)
(22.0 x 14.7mm / 0.87 x 0.58 in.)

35mm image size
(36 x 24 mm / 1.42 x 0.94 in.)

Summary of Contents for EOS Rebel T3







































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS Rebel T3

Reviews:

Related manuals for EOS Rebel T3

Brands by name

Popular brands

Canon EOS Rebel T3, Basic Instruction Manual

Search results

Summary of Contents for EOS Rebel T3

Reviews:

Related manuals for EOS Rebel T3

Brands by name

Popular brands