manualshive.com logo in svg

Canon EOS Rebel T3, Basic Instruction Manual, Page: 112 / 486

Share
Download
Canon EOS Rebel T3 Basic Instruction Manual Download Page 112

28

Load a fully-charged Battery Pack LP-E10 into the camera. The card 
(sold separately) can be an SD, SDHC, or SDXC memory card. The 
captured images are recorded onto the card.

Make sure the card’s write-protect switch is set upward to 
enable writing/erasing.

1

Open the cover.

Slide the lever as shown by the 
arrows and open the cover.

2

Insert the battery.

Insert the end with the battery 
contacts.

Insert the battery until it locks in 
place.

3

Insert the card.

As shown in the illustration, face 
the card’s label side toward the 
camera back.

Insert the card straight in all the way.

4

Close the cover.

Press the cover until it snaps shut.

When you set the power switch to 
<

1

>, the number of possible shots 

(p.32) will be displayed on the LCD 
monitor.

Installing and Removing the Battery and Card

Installing the Battery/Card

Write-protect switch

Summary of Contents for EOS Rebel T3







































































































































































































































































































































































































































































































Reviews:

No comments