Canon EOS R5 Advanced User'S Manual Download Page 714

Page: 714 / 919

46: For the data session, error code received from FTP server

What to check on the FTP server

The connection was terminated by the FTP server.

• Restart the FTP server.

Do the user rights for the FTP server allow reading, writing, and log access?

• Configure the FTP server's user rights to allow reading, writing, and log access.

Do user rights allow access to the target folder on the FTP server?

• Configure the user rights for access to the target folder on the FTP server to allow

saving images from the camera.

Is the FTP server on?

• Turn on the FTP server. The server may have been turned off because of an

energy-saving mode.

Is the hard disk of the FTP server full?

• Increase available space on the hard disk.

47: Image file transfer completion not confirmed by FTP server

This error occurs from a failure to receive confirmation from the FTP server that
image file transfer is complete for some reason.

• Restart the FTP server and camera and send the images again.

48: Security of the connection to the target server cannot be verified.
If you trust this server and connect, set [Trust target server] to
[Enable].

This error occurs from a failure to confirm security of the target server connection
when connecting via FTPS.

• Confirm that the certificate is set correctly.
• Change [

Trust target server

] to [

Enable

] if you prefer to trust target servers

regardless of certificate settings.

714

Summary of Contents for EOS R5























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS R5

Reviews:

Related manuals for EOS R5

Brands by name

Popular brands

Canon EOS R5, Advanced User'S Manual

Search results

Summary of Contents for EOS R5

Reviews:

Related manuals for EOS R5

Brands by name

Popular brands