Canon EOS R Advanced User'S Manual Download Page 518

Page: 518 / 644

518

Responding to Error Messages

11: Connection target not found

In the case of [

], is Camera Connect running?

Establish a connection using Camera Connect (p.442).

In the case of [

], is the power of the printer on?

Turn on the printer.

In the case of [

], is the EOS software running?

Start the EOS software and reestablish the connection (p.463).

Are the camera and the access point set to use the same

password for authentication?

This error occurs if the passwords do not match when the

authentication method for encryption is set to

[Open system]

The setting is case-sensitive, so check upper- and lower-case

characters. Make sure that the correct password for authentication

is set on the camera (p.506).

12: Connection target not found

Is the power of the target device and access point on?

Turn on the target device and access point, then wait a while. If a

connection still cannot be established, perform the procedures to

establish the connection again.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands

Canon EOS R, Advanced User'S Manual

Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands