manualshive.com logo in svg

Canon EOS R, Advanced User'S Manual

Share
Download
Canon EOS R Advanced User'S Manual Download Page 265

265

Selecting the AF Method

You can select the AF method to suit the shooting conditions or subject. 

The camera attempts to focus on faces of any people in an AF point or 

Zone AF frame. In 

[

A

]

 mode, 

[

u

+Tracking]

 is set automatically.

For instructions on selecting an AF method, see page 268.

AF Method

: Face+Tracking

The camera detects and focuses 

on human faces. The AF point <

p

> 

appears over a detected face, which is 

then tracked.

If no face is detected, the entire AF area is used for auto selection AF.

With Servo AF, you can set the initial position for Servo AF (p.270). 

As long as the Area AF frame can track the subject during shooting, 

focusing will continue.

: 1-point AF

The camera focuses using a single AF 

point <

S

>.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands