Canon EOS R Advanced User'S Manual Download Page 251

Page: 251 / 644

251

Menu Function Settings

HDMI display

You can specify how movies are

displayed as they are recorded via HDMI

to an external device. Movie output itself

is either 4K (3840×2160) or Full HD

(1920×1080), depending on the

[Movie

rec. size]

setting.

The default setting for HDMI display is

[

]

●Enables movie display both on the camera screen and on the other

device, via HDMI output.

●Camera operations such as image playback or menu display are

shown on the other device via HDMI, not on the camera.

●Deactivates the camera screen during output via HDMI, so that the

screen is blank.

●Shooting information, AF points, and other information is shown on

the other device via HDMI, but as you watch an external monitor or

other device connected to the recorder, you can stop output of this

information by pressing the <

> button.

●Before recording movies to an external device, confirm that no

information is being sent by the camera, so that no shooting

information, AF points, and so on is displayed on the external

monitor or other device.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands

Canon EOS R, Advanced User'S Manual

Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands