manualshive.com logo in svg

Canon EOS R, Advanced User'S Manual

Share
Download
Canon EOS R Advanced User'S Manual Download Page 199

199

Setting the Movie Recording Quality

High Frame Rate

You can shoot HD movies at a high frame rate of 119.9 fps or 100.0 fps. 

This is ideal for shooting movies that will be played back in slow 

motion. The maximum recording time per movie is 7 min. 29 sec.

Movies are recorded as 

w

2

W

 or 

w

3

W

.

Movie Servo AF and Movie digital IS 

have no effect when you shoot High 

Frame Rate movies. Also during High 

Frame Rate movie shooting, AF is not 

used in focusing.

Sound is not recorded in High Frame 

Rate movies.

Movie time code display during recording advances 4 sec. per second.

Because High Frame Rate movies are recorded as 29.97 fps/25.00 fps 

movie files, they are played back in slow motion at 1/4 speed.

Precautions on [High Frame Rate: Enable]

 

o

Time codes are not recorded when 

[Count up]

 is set to 

[Free run]

 under 

[

z

1: Time code]

 (p.205).

 

o

Check the 

[Movie rec. size]

 setting if you return this setting to 

[Disable]

.

 

o

The screen may flicker if you shoot High Frame Rate movies under 

fluorescent or LED lighting.

 

o

For a moment when you start or stop shooting High Frame Rate movies, 

the movie is not updated, and the frame stops momentarily. Be aware of 

this when recording movies to external devices via HDMI.

 

o

Movie frame rates shown on the screen as you shoot High Frame Rate 

movies do not correspond to the frame rate of the movie recorded.

 

o

Headphones cannot be used, because no sound is audible.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands