Canon EOS M6 Mark II, Advanced User'S Manual

Page: 567 / 606

567
Troubleshooting Guide
[
F
] is displayed.
z
[
F
] may be displayed after repeated movie recording under the following
settings, or if you keep the camera standing by for movie recording over
extended periods.
z
4K movie recording
z
High Frame Rate movie recording
z
Movie recording while connected via Wi-Fi
z
The camera turns off automatically in approx. 3 min. if you continue
recording while
[
F
] is displayed. The camera may also turn off
automatically while standing by for movie recording when [
F
] is
displayed.
z
Turn off the camera when [
F
] is displayed, and wait to allow the camera
to cool down.
The exposure changes during movie recording.
z
If you change the shutter speed or aperture during movie recording, the
changes in the exposure may be recorded.
z
Shooting a few test movies is recommended if you intend to perform
zooming during movie recording. Zooming as you record movies may
cause exposure changes or lens sounds to be recorded, an uneven
audio level, or loss of focus.
The image flickers or horizontal stripes appear during movie
recording.
z
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent lighting, LED lighting, or other light sources during
movie recording. Also, changes in the exposure (brightness) or color
tone may be recorded. In
[
M
] mode, a slow shutter speed may reduce
the problem. The problem may be more noticeable in time-lapse movie
recording.