Canon EOS M6 Mark II Advanced User'S Manual Download Page 552

Page: 552 / 606

552

Software

Downloading and Installing the EOS Software or Other

Dedicated Software

Always install the latest version of the software.

Update any previous versions that are installed by overwriting them with the

latest version.

Do not connect the camera to a computer before you install the software. The
software will not be installed correctly.

The software cannot be installed unless the computer is connected to the
Internet.

Previous versions cannot display images from this camera correctly. Also,
processing RAW images from this camera is not possible.

Download the software.

Connect to the Internet from a computer and access the following
Canon website.

www.canon.com/icpd

Enter the serial number on the back of the screen, then download
the software.

Decompress it on the computer.

For Windows

Click the displayed installer file to start the installer.

For Macintosh

A dmg file will be created and displayed. Follow the steps below to

startup the installer.

Summary of Contents for EOS M6 Mark II































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M6 Mark II

Reviews:

Related manuals for EOS M6 Mark II

Brands by name

Popular brands

Canon EOS M6 Mark II, Advanced User'S Manual

Search results

Summary of Contents for EOS M6 Mark II

Reviews:

Related manuals for EOS M6 Mark II

Brands by name

Popular brands