manualshive.com logo in svg

Canon EOS M6 Mark II, Advanced User'S Manual

Share
Download
Canon EOS M6 Mark II Advanced User'S Manual Download Page 469

469

Responding to Error Messages

23: Device with same IP address exists on selected network

What to check on the camera

 

z

Do the camera and another device connected via Wi-Fi to the same 
network have the same IP address?

 

B

Change the camera’s IP address to avoid using the same address 
as another device on the network. Otherwise, change the IP address 
of the device that has a duplicate address.

 

B

If the camera’s IP address is set to 

[Manual setting]

 in network 

environments using a DHCP server, change the setting to 

[Auto 

setting]

 (

=

445).

Responding to Error Messages 21–23

 

z

Also check the following points when responding to errors numbered 21–23.

 

z

Are the camera and the access point set to use the same password for 

authentication?

 

y

This error occurs if the passwords do not match when the authentication 
method for encryption is set to 

[Open system]

. The setting is case-sensitive, 

so check upper- and lower-case characters. Make sure that the correct 
password for authentication is set on the camera (

=

464).

Summary of Contents for EOS M6 Mark II































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands