Canon EOS M50 Mark II, Advanced User'S Manual, Page: 587 / 709

68: Cannot connect to wireless LAN terminal. Retry from the
beginning.
Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the
specified period of time?
• Hold down the WPS button for the period of time specified in the access point’s
instruction manual.
Are you trying to establish a connection near the access point?
• Try establishing the connection when both devices are within reach of each other.
69: Multiple wireless LAN terminals have been found. Cannot
connect. Retry from the beginning.
Connection is in progress by other access points in Pushbutton Connection
mode (PBC mode) of WPS (Wi-Fi Protected Setup).
• Wait a while before trying to establish the connection.
91: Other error
A problem other than error code number 11 to 69 occurred.
• Turn the camera’s power switch off and on.
121: Not enough free space on server
The target Web server does not have enough free space.
• Delete unnecessary images on the Web server, check the free space on the Web
server, then try sending the data again.
125: Check the network settings
Is the network connected?
• Check the connection status of the network.
126: Could not connect to server
Could not connect to the Web service.
• Try accessing the service again later.
Is the network connected?
• Check the connection status of the network.
587