94
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
●
When the ISO speed is fixed, an exposure level mark based on
your specified value is shown on the exposure level indicator for
comparison to the standard exposure level. The exposure level
mark is shown as [ ] or [ ] when the difference from standard
exposure exceeds 3 stops.
●
You can check the ISO speed in [AUTO] mode by pressing
the shutter button halfway. If standard exposure cannot be
obtained with your specified shutter speed and aperture value,
the exposure level mark moves, indicating the difference from
standard exposure. The exposure level mark is shown as [ ] or
[ ] when the difference from standard exposure exceeds 3 stops.
●
You can also adjust the setting items on the bottom of the screen
by touching an item to select it and then either touching/dragging
the bar or touching [ ][ ].
●
Focus can be locked during recording by touching [
]. [
] is
then displayed.
Recording Movies at Specific
Shutter Speeds and Aperture
Values
Still Images
Movies
Set your preferred shutter speed, aperture value, and ISO speed. For
details on available shutter speeds, see “Shutter” (
213). Available
aperture values vary by lens.
1
Enter [ ] mode.
●
Hold down the mode dial release button
and turn the mode dial to [ ].
●
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (
2
Configure the settings.
●
Turn the [
] dial to set the shutter
speed.
●
Turn the [
] dial to set the aperture
value.
●
Press the [ ] button and turn the [ ] dial
to set the ISO speed.
●
Some shutter speeds may cause flickering on the screen when
recording under fluorescent or LED lighting, which may be
recorded.
●
Large aperture values may delay or prevent accurate focusing.