Canon EOS M200 Advanced User'S Manual Download

Page: 49 / 522

Inserting/Removing the Card

Removal

(1)

Open the cover.

Turn the camera off.

Check that the access lamp (1) is off,

then open the cover.

[Saving...]

is displayed on the screen,

close the cover.

Remove the card.

Gently push in the card, then let it go to

eject.

Pull the card straight out, then close the

cover.

Formatting the Card

If the card is new or was previously formatted (initialized) by another camera

or computer, format the card with this camera (

435).

The number of possible shots varies depending on the remaining capacity of
the card, the settings of image quality, ISO speed, etc.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands