Canon EOS M200 Advanced User'S Manual Download Page 270

Page: 270 / 522

270

Digest Movie Editing

Individual chapters (clips) recorded in <

> mode can be erased. Be

careful when erasing clips, because they cannot be recovered.

Play back the image.

Press the <

> button.

Select a digest movie.

Use the <

> <

> keys to select the

digest movie.

In single-image display, digest movies

are labeled with

[

]

in the upper

left of the screen.

In index display, press <

> to switch

to single-image display.

In the single-image display, press

Select [

Digest movie playback begins.

Press <

> to pause the digest

movie.

The movie playback panel will appear.

Select a clip.

Select

[

]

[

]

to select a clip.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands