Canon EOS M200 Advanced User'S Manual Download Page 207

Page: 207 / 522

207

Movie Recording Quality

On the

[

: Movie rec quality]

tab, select

[Movie rec. size]

to set the image size,

frame rate, and compression method. The

movie will be recorded as an MP4 file.

The frame rate displayed on the

[Movie

rec. size]

screen switches automatically

depending on the

[

: Video system]

setting (

445).

The card’s writing and reading speeds required for recording movies

(card performance requirements) vary depending on the movie recording

size. Before recording movies, see

499

to check the performance

requirements of the card.

Image Size

[

] 3840×2160

The movie is recorded in 4K quality. The aspect ratio is 16:9. Not

available unless the shooting mode switch is set to <

[

] 1920×1080

The movie is recorded in Full High-Definition (Full HD) quality. The

aspect ratio is 16:9.

[

] 1280×720

The movie is recorded in High-Definition (HD) quality. The aspect ratio is

16:9.

If you change the

[

: Video system]

setting, also set

[

: Movie rec. size]

again.

Normal playback of 4K and

movies may not be possible on other

devices, because playback is processing-intensive.

Clarity and noise vary slightly depending on movie recording size, the lens

used, and other settings.

Movies cannot be recorded in VGA quality.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands