Canon EOS M200 Advanced User'S Manual Download Page 11

Page: 11 / 522

Compatible Cards

The following cards can be used with the camera regardless of capacity.

If the card is new or was previously formatted (initialized) by another

camera or computer, format the card with this camera

(

435).

SD/SDHC/SDXC memory cards

UHS-I cards supported.

Cards that Can Record Movies

When recording movies, use a high-capacity card with ample performance

(fast enough writing and reading speeds) for the movie recording size. For

details, see

500.

In this manual, “card” refers to SD memory cards, SDHC memory

cards, and SDXC memory cards.

The camera does not come with a card for recording photos/

movies.

Please purchase it separately.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands