Canon EOS M200 Advanced User'S Manual Download

Page: 106 / 522

106

Program AE Mode (P)

The camera automatically sets the shutter speed and aperture to suit the

subject’s brightness.

“

” stands for Program.

“AE” stands for Auto Exposure.

Set the shooting mode to [

Focus on the subject.

Aim the AF point over the subject and

press the shutter button halfway.

Check the display and shoot.

As long as the exposure value is not

blinking, standard exposure will be

obtained.

If the “

30"

” shutter speed and the lowest f/number blink, it indicates

underexposure. Increase the ISO speed or use flash.

If the “

1/4000

” shutter speed and the highest f/number blink, it indicates

overexposure. Lower the ISO speed or use an ND filter (sold separately) to
reduce the amount of light entering the lens.

Summary of Contents for EOS M200











































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands

Canon EOS M200, Advanced User'S Manual

Search results

Summary of Contents for EOS M200

Reviews:

Related manuals for EOS M200

Brands by name

Popular brands