Canon EOS M2, Instruction Manual

Page: 276 / 364

w
Printing
276
You can crop the image and print only the
cropped portion as if the image was
recomposed.
Set the cropping right before printing. If
you set the cropping and then set the print
settings, you may have to set the cropping
again before printing.
1
On the print settings screen, select [Cropping].
2
Set the cropping frame size, position, and aspect ratio.

The image area within the cropping frame will be printed. The cropping
frame’s aspect ratio can be changed with [
Paper settings ].
Changing the cropping frame size
Tap the screen and pinch two fingers closed or spread them apart as
necessary to change the size of the cropping frame. The smaller the
cropping frame, the larger the image magnification will be for printing.
Moving the cropping frame
Press the <
S
> keys to move the frame over the image vertically or
horizontally. Move the cropping frame until it covers the desired image
area.
Rotating the frame
Pressing the <
B
> button will toggle the cropping frame between the
vertical and horizontal orientations. This enables you to create a vertically
oriented print from a horizontal image.
Image tilt correction
By turning the <
5
> dial, you can adjust the image tilt angle up to ±10
degrees in 0.5-degree increments. When you adjust the image tilt, the
<
O
> icon on the screen will turn blue.
3
Press <
0
> to exit the cropping.

The print settings screen will reappear.

You can check the cropped image area on the upper left of the print
settings screen.
Cropping the Image
Tilt correction