Canon EOS M2, Instruction Manual, Page: 176 / 364

176
Connecting the camera to a TV set is recommended to play back the movies
shot (p.247, 251).
When you select the movie shooting mode [
k
], autoexposure is set to adjust
the brightness automatically.
1 Set the Mode Dial to <
k
>.
2 Tap the shooting mode icon on the
screen’s upper left corner.

The shooting mode selection screen will
appear.
3 Select [
k
] (Movie auto exposure)
for the shooting mode.
4 Focus the subject.

Before shooting a movie, focus with AF
or manual focus (p.108-121).

By default, [ Movie Servo AF: Enable ]
(p.203) is set for continuous focusing.

When [ Movie Servo AF ] is set to
[ Enable ], you can tap [
B
] on the
screen’s lower left to stop/start the
focusing. If you stop the focusing, the AF
point will turn gray.
5 Shoot the movie.

Press the <
o
> (Movie start/stop) button
to start shooting a movie. To stop
shooting the movie, press the <
o
>
(Movie start/stop) button again.

While the movie is being shot, the “
o
”
mark will be displayed on the upper right
of the screen.
k
Shooting Movies
Autoexposure Shooting
Recording movie