95
Adjusting the Focus
AF Lock
While using continuous AF or AF-Boosted MF, you can lock the focus on a certain subject and then move the
camera to change the composition.
While the autofocus is active, press
[AF]
>
[AF LOCK].
• Alternatively, you can press an assignable button set to [AF Lock] (
A
• The focus will be locked and
@
and the AF frame on the monitoring screen will turn gray. When you are
using Face AF, the face detection frame around the main subject will turn gray.
• Press [AF LOCK] again to cancel the AF lock.
NOTES
NOTES
• AF lock will be canceled automatically in the following cases:
- If the camera is turned off or the camera’s system frequency is changed.
- If the lens is removed or replaced.
- If the
[AF]
>
[OPTIONS]
>
[AF Mode] setting is changed to [One Shot].
- If slow & fast motion recording is activated.
Z
Changing the AF Frame Size and Position
You can change the size and position of the AF frame that appears on the monitoring screen while using one of
the autofocus functions. The size and position of face detection frames and tracking frames will change
automatically as the subject moves and its relative size changes within the frame.
1 Open the [AF Frame Position] submenu.
Setup screen:
[AF]
>
[OPTIONS]
>
[AF Frame Position]
Monitoring menu:
[Camera Setup] (
v
)
>
[Focus]
>
[AF Frame Position]
2 Select the desired option and then press SET.
3 From the same submenu select [AF Frame Size].
4 Select the desired option and then press SET.
Options for [AF Frame Position]
[Selectable]:
You can move the AF frame using the joystick or SELECT dial on the optional viewfinder or by
pressing
[F.
ASSIST.]
>
[
FRAME] and then pressing [
Í
], [
Î
], [
Ï
], [
Ð
] on the
camera. Press [CENTER] (setup screen) or press the BACK button on the optional viewfinder to
return the AF frame to the center position.
[Center Frame]: A fixed AF frame appears at the center of the screen.
Options for [AF Frame Size]
[Large]:
Standard AF frame size.
[Small]:
Smaller AF frame size (about 1/3 the standard size).
