155
Connecting to an External Monitor or Recorder
Options
1
Not available for the VIDEO terminal (optional viewfinder).
2
For the HDMI OUT terminal, this option is only available when
[System Setup]
>
[Term. Output Setup]
>
[HDMI Max
Res.] is set to [1920x1080].
3
Only available for the VIDEO terminal (optional viewfinder).
NOTES
• When you apply the [ACESproxy] LUT to the SDI OUT terminals, MON. terminals or HDMI OUT terminal, the
selected terminal will output ACESproxy video data. Using a compatible monitor*, you can perform on-set
color grading and check the image after color correction as you continue shooting (
A
* When using the HDMI OUT terminal, a monitor that supports full range YCbCr quantization is required.
• If you set an assignable button to [LUT] (
A
127), you can press the button to turn on and off the LUTs applied
to all video outputs at once.
• If you change the [Gamma] or [Color Space] settings in the custom picture file (
A
134), all the LUT settings
will be reset to [Off].
Superimposing Onscreen Displays on Video Outputs
You can choose to output the camera’s onscreen displays along with the video output from the VIDEO terminal
(optional viewfinder), MON. terminals or HDMI OUT terminal to show the camera’s onscreen displays on
monitoring devices connected to the corresponding terminals. This will not affect your recordings or video output
from the SDI OUT terminals.
1 Open the [OSD Output] submenu.
[Monitoring Setup] (
¢
)
>
[OSD Output]
>
[VIDEO] (optional viewfinder) or [MON.+HDMI]
(external monitors)
>
[Output]
2 Select [On] and then press SET.
• Alternatively, you can press an assignable button set to [OSD Output: VIDEO] (optional viewfinder only),
[OSD Output: MON.+HDMI] (external monitors only) or [OSD Output] (all monitoring devices at once)
(
A
•
T
appears at the right of the monitoring screen (in shooting mode, only if
[Monitoring Setup]
>
[Custom Display 2]
>
[OSD Output] is set to [On]).
Applied LUT
Output Settings with LUT applied
Description
Gamma curve
Color space
[BT.709]
Wide DR
BT.709
LUT for viewing on the optional viewfinder and external monitors compatible with BT.709
specifications.
[BT.2020]
1
Wide DR
BT.2020
LUT for viewing on external monitors compatible with ITU-R BT.2020 standards, which
define parameters for ultra-high-definition television (4K/8K).
[DCI]
1
DCI
DCI-P3
LUT for viewing on external monitors that support color spaces and gamma curves that
follow the guidelines established by DCI (Digital Cinema Initiatives).
[HDR-ST 2084]
1, 2
SMPTE ST 2084
BT.2020
LUT for viewing HDR (high dynamic range) images on external monitors compatible with
the SMPTE ST 2084 standard. The signal output will use narrow range (video range)
coding.
[ACESproxy]
1
ACESproxy
ACESproxy
LUT for viewing on external monitors compatible with the ACESproxy standard
established by ACES (Academy Color Encoding System). The signal output will use full
range coding.
[ST 2084 Assist.
(1600%)]
3
,
[ST 2084 Assist.
(400%)]
3
Original gamma
curve
BT.709
LUT for viewing HDR (high dynamic range) images on the optional viewfinder and other
monitoring devices. The LUT follows the SMPTE ST 2084 transfer function to convert a
brightness range of 1600% or 400% respectively into a linear brightness scale.
[Off]
–
–
No LUT applied.
