Canon EOS C500 PL, Instruction Manual

Page: 39 / 212

39
Preparing the Camera
Using a Tripod with 0.64 cm (1/4 in.) Mounting Screws
To use a tripod with 0.64 cm (1/4 in.) mounting screws, first attach
the supplied tripod adapter base to the camera and then attach
the tripod to the adapter base.
1 Remove the original TB-1 tripod base from the camera.
• Remove the 4 screws and then remove the base.
2 Attach the supplied tripod adapter base for 0.64 cm (1/4 in.)
tripods.
• Firmly screw in the 4 screws.
3 Attach the tripod.
• Firmly screw in the tripod screw.
Attaching the Handle Unit
1 Insert the attachment base at the bottom of the handle unit to the
camera’s accessory shoe.
2 Tighten the handle unit’s lock screw while gently pressing it down.
NOTES
• You can use the accessory shoe or the socket for 0.64 cm (1/4 in.)
screws on the handle unit to attach a variety of commercially
available accessories.
Attaching a Shoulder Strap
Pass the ends through the strap mount and adjust the length of
the strap.
IMPORTANT
• Be careful not to drop the camera when attaching or adjusting the
shoulder strap.
COP
Y