Canon EOS C500 Mark II Instruction Manual Download Page 153

Page: 153 / 241

153

Network Functions

About the Network Functions

To be able to use the following network functions, you will need to attach an optional accessory to the system
expansion terminal (

14) and connect to a Wi-Fi network, or attach an optional EU-V1 Expansion Unit 1 or

EU-V2 Expansion Unit 2 to the camera and use the

(Ethernet) terminal on the EU-V1 or EU-V2 to connect to

a wired (Ethernet) network. For details about the accessories and how to attach them, refer to the Cinema EOS
System Expansion User Guide.

Network functions and connection types

Connection to a Wi-Fi network via an external access point (wireless router, etc.)

Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point.

Before using the network functions

• The instructions in this chapter assume you already have a correctly configured and working network and

correctly configured network device(s). If necessary, refer to the documentation provided with the network
devices you plan to use.

• Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)

and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.

IMPORTANT

• Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or

settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.

• Avoid using open networks or networks without sufficiently strong security settings. Using an unprotected

network can expose your data to monitoring by unauthorized third parties.

NOTES

• Do not open the card compartment cover while using network functions.

• Do not place cables connected to the camera’s terminals near the optional Wi-Fi accessory. Doing so may

negatively affect the wireless communication over Wi-Fi.

Network function

Description

Wired network

(Ethernet)

Wi-Fi

Infrastructure

Camera Access

Point

Browser Remote

Control the camera remotely from the Web
browser of a connected device.

172

IP Streaming

Stream the camera’s live video and audio over
IP to a compatible IP video decoder connected
to the network.

–

170

FTP File Transfer

Transfer clips recorded with the camera to
another device connected to the network
using the FTP protocol.

169

Summary of Contents for EOS C500 Mark II


















































































































































































































































Search results

Summary of Contents for EOS C500 Mark II

Reviews:

Canon EOS C500 Mark II, Instruction Manual, Page: 153 / 241

Search results

Summary of Contents for EOS C500 Mark II

Reviews: