Canon EOS C300 Mark III, Manual

Page: 96 / 254

Setting the User Bit
96
Setting the User Bit
In CAMERA mode, you can set a user bit composed of the date or the time of recording or an identification code
consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9
and the letters A to F.
The user bit is recorded with clips and can be output from the SDI OUT terminal, MON. terminal or HDMI OUT
terminal. It can be used freely to categorize and manage recordings or to keep additional information about
them.
To set an hexadecimal code
1 Select > [
B
System Setup] > [User Bit Type] > [Setting] > [Change].
• To reset the user bit to [00 00 00 00], select [Reset] instead.
2 Enter the user bit using the data entry screen (
A
60).
• Press the CANCEL button to close the screen without making any changes.
To use the recording date/time
Select > [
B
System Setup] > [User Bit Type] > [Date] or [Time].