Canon EOS C300 Mark III, Manual

Page: 55 / 254

55
Recording Video and Photos
Right side of the screen
4
Double slot recording (
A
47). 2: [Recording Mode]
Recording operation
STBY,
Ü
REC Clip recording: record standby, recording.
S&F STBY,
S&F
Ü REC
Slow & fast motion recording (
A
115): record standby, recording.
PRE STBY,
PRE
Ü REC
Pre-recording (
A
118): record standby, recording.
`
Recording command (
A
150, 151). 2: [Rec Command]
00.00P, 00.00i Frame rate (
A
63).
When slow & fast motion recording is activated, the shooting frame rate is also
displayed (000/00.00P).
2: [Frame Rate]
U
Genlock (
A
98).
• Displayed only when an optional EU-V1 Expansion Unit 1 or EU-V2 Expansion
Unit 2 is attached to the camera.
2: [Genlock]
00:00:00.00 / 00:00:00:00
R, P, F, E Time code (
A
94).
Time code status (
A
95).
2: [Time Code]
Power supply level indicator 2: [Remaining Battery]
è  é 
ê

ë

(in red)
000 min
Remaining battery charge of a BP-A60 (supplied) or BP-A30 (optional) Battery Pack
and estimated remaining usage time (in minutes).
• When
is displayed, replace the battery pack with a fully charged one.
• Depending on the conditions of use, the actual battery charge level may not be
indicated accurately or may not match the levels shown on the [
B
System
Setup] status screen or the indicators on the battery pack.
DC IN 00.0V Power supply voltage when using an AC adapter.
• When the voltage falls below the selected low-power warning level (
A
200),
the voltage will be displayed in red.
è

é

ê

ë
000%,
00.0V
Remaining battery charge of a commercially available V-mount battery.
• Available only when the optional EU-V2 Expansion Unit 2 is attached to the
camera.
• Depending on the battery used, the battery charge level cannot be indicated as
a percentage. In that case, the voltage will be displayed instead.
• When the power level falls below the selected low-power warning level
(
A
200), the percentage or voltage will be displayed in red.
Icon/Display Description Custom Display
( only),
,
Sensor mode (
A
62). 2: [Sensor Mode]
60(24)fps, 60(30)fps Output Terminals Status (
A
123). 2: [Output Terminals
Status]
0000x0000 Resolution (
A
62). 2: [Resolution/
Color Sampling]
00 bit,
YCC422 00 bit Color depth, color sampling (
A
62).
• Displayed as “00 bit 4:3” when the resolution is set to [4192x3140 (4:3)], and
as “00 bit 6:5” when set to [3768x3140 (6:5)].
7
Photo recorded on the SD card (
A
52). 2: [Photo]
(in red) No SD card or cannot record photos on the SD card.
MON. terminal disabled / HDMI OUT terminal active (
A
150). 2: [Output Terminals
Status]
T (in red) Output onscreen displays (
A
152). 2: [OSD Output]
^
(in yellow) Magnification (
A
83). 1: [Magnification]
Icon/Display Description Custom Display