Canon EOS C300 Mark III Manual Download Page 44

Page: 44 / 254

Preparing Recording Media

Inserting a CFexpress Card

1 Slide the card compartment cover switch all the way in

the direction of the arrow.

• The card compartment cover will open to the left.

2 Insert the card straight, with the label facing the back of

the camera (the side with the battery compartment) all the
way into one of the CFexpress card slots.

• You can use two cards, one in each card slot.

3 Close the card compartment cover.

• Do not force the cover closed if the card is not correctly

inserted.

CFexpress card access indicators

If you set

> [

System Setup] > [CFexpress Access LED] to [Off], the CFexpress card access indicators

will not illuminate.

Removing a CFexpress Card

1 Wait until the CFexpress card access indicator is off or is

illuminated in green.

2 Slide the card compartment cover switch in the direction of

the arrow.

• The card compartment cover will open to the left.

3 Make sure the CFexpress card access indicator is off and

then push the CFexpress card release button.

4 Pull out the CFexpress card and close the card

compartment cover.

CFexpress

indicator

Card status

Red

Accessing the card.

Green

Recording/playback is possible and the CFexpress card is selected for recording/playback.

Off

A card is not inserted or the card slot is not currently selected.

CFexpress card

access indicators

Summary of Contents for EOS C300 Mark III































































































































































































































































Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands

Canon EOS C300 Mark III, Manual

Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands