Canon EOS C300 Mark III Manual Download Page 139

Page: 139 / 254

139

Playback

Playing Back Recordings

1 In the index screen, select the thumbnail of the desired recording and

then press the

button.

•

Clips

: Playback will start from the selected clip until the last clip in the index

screen.

•

Photos

: The selected photo will be displayed.

2 Use the joystick and buttons on the camera to control the playback.

•

Clips

: Press the

button or press SET to pause/resume playback. You

can also use the onscreen joystick guide (

141). Press the

button to

stop playback and return to the index screen.

•

Photos

: Push the joystick left/right to view other photos. Press the

button

to return to the index screen.

NOTES

• The following image files may not be displayed correctly.

- Images not recorded with this camera.
- Images edited on a computer.
- Images whose file names have been changed.

• You can press the DISP button repeatedly to change the level of onscreen displays (

58).

Custom picture settings of RAW clips during playback

RAW clips are played back using the following custom picture settings.
• [Gamma/Color Space]: Same setting used for recording
• [Color Matrix]:

[Neutral]

• Contour lines are de-emphasized in a way similar to setting [Sharpness] > [Level] to –10.
• Other settings are set to [Off].

Summary of Contents for EOS C300 Mark III































































































































































































































































Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands

Canon EOS C300 Mark III, Manual

Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands