Canon EOS C300 Mark III, Manual

Page: 111 / 254

111
Adding Marks to Clips in CAMERA Mode
Adding Marks to Clips in CAMERA Mode
In CAMERA mode, only when the main recording format is set to XF-AVC, you can add marks to primary clips to
set them apart. While recording, you can add shot marks (
!
) to flag an important shot or frame. After recording
a clip, you can add an OK mark (
$
) or check mark (
%
) to help you identify particular clips.
You can add and delete marks also in MEDIA mode (
A
144, 144).
Adding a Shot Mark while Recording
To add a shot mark to a clip while recording, you must set an assignable button to [Add Shot Mark] in advance.
When pre-recording is activated, you cannot add a shot mark before the REC button is pressed to start
recording the clip.
1 Set an assignable button to [Add Shot Mark] (
A
123).
2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.
• [Shot Mark] will appear briefly and the shot mark will be added to the current frame of the clip.
NOTES NOTES
• Up to 100 shot marks can be added to a single clip.
• There may be up to a 0.5 second delay from when you press the button to when the camera adds the shot
mark.
• When a clip contains a shot mark,
!
will appear next to the clip’s thumbnail in the playback index screen.
Adding an
$
Mark or
%
Mark to the Last Clip Recorded
After recording an important clip, you can add to it a mark to set it apart.
$
marks can also be used to protect
important clips, as clips with an
$
mark cannot be deleted with the camera.
To add an
$
mark or
%
mark in CAMERA mode, you must set an assignable button to [Add
$
Mark] or
[Add
%
Mark] in advance.
1 Set an assignable button to [Add
$
Mark] or [Add
%
Mark] (
A
123).
2 After recording a clip, press the assignable button.
• [
$
Mark] or [
%
Mark] will appear briefly and the selected clip mark will be added to the clip.
NOTES NOTES
• A clip cannot have both an
$
mark and a
%
mark at the same time.
• When a clip has an
$
mark or
%
mark, the respective icon will appear next to the clip's thumbnail in the
playback index screen.