Canon EOS C300 Mark II, Instruction Manual

Page: 72 / 223

Adjusting the Aperture
72
• When you release the button, automatic aperture mode will end and the icon will disappear. The selected
aperture value will appear on the bottom of the screen and will be displayed also on the rear panel.
NOTES NOTES
• You can use the [
v
Camera Setup]
>
[AE]
>
[AE Response] setting to change how quickly the aperture
changes during automatic aperture mode.
• Push auto iris is not available during slow & fast motion recording.
Automatic Aperture
When a compatible EF lens is attached to the camera, you can have the camera automatically adjust the
aperture.
1 Open the aperture [Mode] submenu.
[
v
Camera Setup]
>
[Iris]
>
[Mode]
2 Select [Automatic] and then press SET.
• The camera will automatically adjust the aperture to obtain optimal
exposure. The selected aperture value will appear on the bottom of the
screen with an icon next to it, and will be displayed also on the rear
panel (
A
59).
NOTES NOTES
• If you set an assignable button to [Iris Mode] (
A
131), you can press the button to toggle between the
[Automatic] and [Manual] settings when a compatible EF lens (
A
213) is attached to the camera.
• Automatic aperture is not available during slow & fast motion recording.
Exposure Compensation - AE Shift
Use AE shift to compensate the exposure that was set using automatic aperture, in order to darken or lighten the
image.
You can also perform this function remotely using Browser Remote on a connected Wi-Fi device (
A
120, 124).
1 Open the [AE Shift] submenu.
[
v
Camera Setup]
>
[AE]
>
[AE Shift]
2 Select an AE shift level and then press SET.
• You can select one of 17 AE shift levels from –2.0 to +2.0.
• The selected AE shift level will be displayed above the exposure bar
and the camera will attempt to adjust the exposure accordingly.
[
v
Camera Setup]
[Iris]
[Mode]
[Manual]
[
v
Camera Setup]
[AE]
[AE Shift]
[±0]