Canon EOS C300 Mark II, Instruction Manual

Page: 62 / 223

Video Configuration: System Frequency, Frame Rate, Resolution and Bit Rate
62
Video Configuration: System Frequency, Frame Rate, Resolution
and Bit Rate
Before you record, set the video configuration used for primary clips by selecting the resolution (frame size) and
color sampling settings, bit rate and frame rate that best match your creative needs. Available frame rate options
will depend on the system frequency selected. See the table following the procedures for a summary.
For details about the video configuration of proxy clips, refer to
Simultaneous Recording of Proxy Clips (
A
111).
Selecting the System Frequency
1 Open the [System Frequency] submenu.
[
3
Recording/Media Setup]
>
[System Frequency]
2 Select the desired option and then press SET.
• The camera will reset and restart in the selected mode.
Selecting the Frame Rate
This procedure is not necessary when the system frequency is set to
[24.00 Hz].
1 Open the [Frame Rate] submenu.
[
3
Recording/Media Setup]
>
[Frame Rate]
2 Select the desired option and then press SET.
• The selected frame rate will appear on the top of the screen and will be displayed also on the rear panel.
Selecting the Resolution and Color Sampling Settings
1 Open the [Resolution/Color Sampling] submenu.
[
3
Recording/Media Setup]
>
[Resolution/Color Sampling]
2 Select the desired option and then press SET.
• By default, the resolution/color sampling used does not appear on the screen but you can choose to display
it with the custom display function (
A
57).
Operating modes:
Operating modes:
Operating modes:
* Depending on the country/region
of purchase.
[
3
Recording/Media Setup]
[System Frequency]
[59.94 Hz] or [50.00 Hz]*
* Depending on the country/region
of purchase.
[
3
Recording/Media Setup]
[Frame Rate]
[29.97P] or [25.00P]*
[
3
Recording/Media Setup]
[Resolution/Color Sampling]
[3840x2160 YCC422 10 bit]