Canon EOS C300 Mark II, Instruction Manual

Page: 119 / 223

119
Using the Optional RC-V100 Remote Controller
Using the Optional RC-V100 Remote Controller
You can connect the optional RC-V100 Remote Controller to the camera’s REMOTE terminal in order to control
the camera (including advanced recording functions) from a distance. The remote controller lets you turn the
camera on, navigate the menus and remotely control the aperture and shutter speed, change picture-related
settings like the knee and sharpness, and more.
Use the cable supplied with the remote controller to connect it to the camera. For details on how to connect and
use the remote controller, refer to its instruction manual.
1 Turn off the camera and connect the optional RC-V100 Remote
Controller to the camera.
2 Turn on the camera and open the [REMOTE Term.] submenu.
[ System Setup]
>
[REMOTE Term.]
3 Select [RC-V100] and then press SET.
Options
[RC-V100]: Select this option to use the optional RC-V100 Remote Controller.
[Standard]: Select this option to use commercially available remote controls.
NOTES NOTES
• The following controls on the remote controller will not operate the camera: AGC button and AUTO KNEE
button.
• The AUTO IRIS button on the remote controller will operate the camera only when a compatible EF lens
(
A
213) is attached to the camera.
• The ZOOM button on the remote controller will operate the lens only when a CINE-SERVO CN7x17 KAS S/E1
lens is attached to the camera.
• Adjusting picture-related settings with the remote controller can be performed only when the detailed settings
were activated ([
/
Custom Picture]
>
[Other Settings]
>
[Activate] is set to [On],
A
134).
Operating modes:
Remote cable
(supplied with the RC-V100)
[ System Setup]
[REMOTE Term.]
[Standard]