Canon EOS C200, Instruction Manual

Page: 84 / 220

Adjusting the Focus
84
One-Shot AF
In this focus mode, you will focus manually in most situations but still have the option to have the camera focus
automatically only once on the subject inside the AF frame that appears on the screen. You can also change the
size and position of the AF frame.
1 Set the focus mode switch on the lens to AF.
• On a compatible EF Cinema lens, enable automatic
adjustment on the lens (
A
81).
• will appear on the left of the screen.
2 Open the focus [AF Mode] submenu.
>
[
v $
Camera Setup]
>
[AF Mode]
3 Select [One Shot] and then press the joystick.
4 If necessary, change the size and position of the AF
frame (
A
86).
• You can move the AF frame by touching the desired
position on the LCD screen.
5 Press and hold the ONE-SHOT AF button.
• A white AF frame will appear on the screen and the camera will focus automatically. When you are using
Face AF, the face detection frame around the face of the person who has been determined to be the main
subject will turn white.
• When correct focus has been achieved, the AF frame turns green. If the camera cannot focus automatically,
the AF frame will turn red.
• The AF frame will disappear when you release the ONE-SHOT AF button.
NOTES NOTES
• One-shot AF will not work in the following cases.
- When slow motion recording is activated.
- When the shutter speed mode is set to [Slow] and the shutter speed is set to 1/4 or 1/3.
- When Face AF is set to [Face Only] and a face has not been detected.
• When the aperture value used is F11 or higher, Dual Pixel CMOS AF will not work and the camera will focus
using contrast-detection autofocus.
AF-Boosted MF
In this focus mode, you can focus manually most of the way and let the camera finish focusing automatically.
This is very convenient when you want to make certain that your 4K recordings are in sharp focus.
Additionally, with this mode, if the camera cannot evaluate how to adjust the focus, it will not perform unreliable
focus adjustments. This results in an overall smoother focusing operation than with continuous AF.
1 Set the focus mode switch on the lens to AF.
• On a compatible EF Cinema lens, enable automatic adjustment on the lens (
A
81).
• will appear on the left of the screen.
2 Open the focus [AF Mode] submenu.
>
[
v $
Camera Setup]
>
[AF Mode]
3 Select [AF-Boosted MF] and then press the joystick.
• When the focus is in the manual adjustment range, a yellow focus frame will appear on the screen.
4 If necessary, change the size and position of the AF frame (
A
86).