Canon EOS C200 Instruction Manual Download

Page: 27 / 220

Preparing the Power Supply

Connecting the CA-A10 AC Adapter

1 Set the

switch to OFF.

2 Connect the AC adapter’s DC plug to the DC IN

terminal on the camera.

• Align the cable so the red dot on the plug is facing

up.

• To disconnect the AC adapter, pull back the

metallic tip of the plug and then disconnect the
cable from the terminal.

3 Connect the power cord to the AC adapter and plug

it into a power outlet.

IMPORTANT

• Make sure to turn off the camera before connecting

or disconnecting the AC adapter.

• When using the AC adapter, do not fix it permanently

to one place as this may cause a malfunction.

Turning the Camera On and Off

The camera has two operating modes: CAMERA (

) mode for making recordings and MEDIA (

)

mode for playing back recordings. Select the operating mode using the

switch.

To turn on the camera

Set the

switch to CAMERA for

mode or

MEDIA for

mode.

To turn off the camera

Set the

switch to OFF.

CAMERA mode

MEDIA mode

DC IN
terminal

AC adapter

Summary of Contents for EOS C200





























































































































































































































Search results

Summary of Contents for EOS C200

Reviews:

Related manuals for EOS C200

Brands by name

Popular brands

Canon EOS C200, Instruction Manual

Search results

Summary of Contents for EOS C200

Reviews:

Related manuals for EOS C200

Brands by name

Popular brands