Canon EOS C100 Mark II Instruction Manual Download Page 164

Page: 164 / 214

Photo Playback

164

Photo Playback

You can view the photos that you took with the camcorder.

Displaying the [Photos] Index Screen

Display the [Photos] index screen to view photos.

1 Set the

switch to MEDIA.

• The camcorder switches to

mode and the clip index

screen appears.

2 Press the INDEX button.

• The index screen selection menu appears.

3 Select [Photos] and then press the joystick.

• The [Photos] index screen appears.

• After you are finished viewing photos, press the INDEX button

to return to the [AVCHD] index screen.

Viewing Photos

1 Move the orange selection frame to the desired photo.

2 Press the

button to view the photo.

• The photo playback screen appears and the selected photo is

displayed.

• Use the

buttons or push the joystick left/right to switch to

the previous/next photo.

• Press the DISP. button to hide/show the onscreen displays.

• Press the

button to return to the [Photos] index screen.

IMPORTANT

• Observe the following precautions while either of the SD card access

indicators is illuminated or flashing in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the SD card compartment cover and do not remove the

SD cards.

NOTES

• The following photos may not be displayed correctly.

- Photos not recorded with this camcorder.
- Photos created or edited on a computer.
- Photos whose file names have been changed.

Operating modes:

COP

Summary of Contents for EOS C100 Mark II























































































































































































































Search results

Summary of Contents for EOS C100 Mark II

Reviews:

Related manuals for EOS C100 Mark II

Brands by name

Popular brands

Canon EOS C100 Mark II, Instruction Manual

Search results

Summary of Contents for EOS C100 Mark II

Reviews:

Related manuals for EOS C100 Mark II

Brands by name

Popular brands