Canon EOS C100 Mark II, Instruction Manual, Page: 126 / 214

Playback
126
Switching Between the SD Card Slots
If both SD card slots contain an SD card, you can switch between
them as necessary.
Press the SLOT SELECT button.
• The access indicator of the selected SD card slot will illuminate in
green.
Switching to Other Index Screens
To view other recordings on the currently selected SD card, you can switch to any index screen from the
[AVCHD] index screen*. Open the [AVCHD] index screen to view AVCHD clips, the [Shot List] index screen to
view shots recorded during continuous recording, the [MP4] index screen to view MP4 clips and the [Photos]
index screen to view photos.
* When any other index screen is displayed, you can switch only to the [AVCHD] index screen.
1 Press the INDEX button.
• The index screen selection menu appears.
2 Select the desired index screen and then press the joystick.
• The selected index screen appears.
• Select [Cancel] instead to cancel the operation.
• Press the INDEX button again to return to the [AVCHD] index screen.
NOTES
• If you set the camcorder to mode during continuous recording mode, the [Shot List] index screen will
open automatically.
• Clips recorded at a system frequency other than the one currently used by the camcorder, cannot be played
back. To play back such clips, change the camcorder's system frequency (
A
54) to match the recordings on
the SD card.
Operating modes:
Operating modes:
COP
Y