background image

486

Responding to Error Messages

 22: No response from DNS server

What to check on the camera

 

On the camera, does the DNS server’s IP address setting match the 

server’s actual address?

 

g

Set the IP address to 

[Manual setting]

. Then, on the camera, set 

the IP address that matches the address of the DNS server used 

(

=

497, 

=

462).

What to check on the DNS server

 

Is the power of the DNS server on?

 

g

Turn on the DNS server.

 

Are the DNS server settings for IP addresses and the corresponding 

names correct?

 

g

On the DNS server, make sure IP addresses and the corresponding 

names are entered correctly.

 

Is the DNS server working correctly?

 

g

Check the DNS server settings to make sure it is working correctly 

as a DNS server.

 

g

If applicable, ask your network administrator to ensure the DNS 

server is available.

What to check on the network as a whole

 

Does the network that you are trying to connect to via Wi-Fi include a 

router or similar device that serves as a gateway?

 

g

If applicable, ask your network administrator for the network gateway 

address and enter it on the camera (

=

497, 

=

462).

 

g

Make sure that the gateway address setting is correctly entered on 

all network devices including the camera.

Summary of Contents for EOS 90D

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: