Canon EOS 90D Instruction Manual Download Page 611

Page: 611 / 888

399

Connecting to a Smartphone

You can do the following after pairing the camera with a smartphone

compatible with Bluetooth low energy technology (hereafter, “Bluetooth”).



Establish a Wi-Fi connection using only the smartphone (

400).



Establish a Wi-Fi connection with the camera even when it is oﬀ (

405).



Geotag images with GPS information acquired by the smartphone

(

475).



Control the camera remotely from a smartphone (

404).

You can also do the following after connecting the camera to a smartphone

via Wi-Fi.



Browse and save images on the camera from a smartphone (

404).



Control the camera remotely from a smartphone (

404).



Send images to a smartphone from the camera (

413).

Turning on Bluetooth and Wi-Fi on a Smartphone

Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that

pairing with the camera is not possible from the smartphone’s Bluetooth

settings screen.

To establish a Wi-Fi connection via an access point, see “Wi-Fi Connection via

Access Points” (

458).

Installing Camera Connect on a Smartphone

The dedicated app Camera Connect (free of charge) must be installed on

the smartphone on which Android or iOS is installed.



Use the latest version of the smartphone OS.



Camera Connect can be installed from Google Play or App Store. Google

Play or App Store can also be accessed using the QR codes that appear

when the camera is paired or connected via Wi-Fi to a smartphone.

For the operating system versions supported by Camera Connect, refer to the

download site of Camera Connect.

Sample screens and other details in this guide may not match the actual user

interface elements after camera ﬁ rmware updates or updates to Camera

Connect, Android, or iOS.

Summary of Contents for EOS 90D

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 90D

Reviews:

Canon EOS 90D, Instruction Manual, Page: 611 / 888

Search results

Summary of Contents for EOS 90D

Reviews: