Canon EOS 90D, Instruction Manual

Page: 368 / 888

156
Remote Control Shooting
o
Infrared remote controllers such as the RC-6 cannot be used for remote
control shooting when the camera is paired via Bluetooth with a smartphone
or wireless remote control.
o
Fluorescent or LED lighting may cause camera misoperation by triggering the
shutter inadvertently. Try to keep the camera away from such light sources.
o
If you point a remote controller for a TV set toward the camera and operate it,
it may cause camera misoperation by triggering the shutter inadvertently.
o
If fl ash light is emitted from a fl ash on another camera around this camera,
it may cause camera malfunction by triggering the shutter inadvertently. Do
not expose the remote control sensor to fl ash light from a fl ash on another
camera.
Wireless Remote Control BR-E1
You can shoot remotely up to approx. 5 meters/16.4 feet away from the
camera.
After pairing the camera and BR-E1 (
=
464), set the drive mode to <
Q
>
or <
k
> (
=
151).
For operation procedures, refer to the BR-E1 instruction manual.
RC-6 and BR-E1
o
If remote control shooting is enabled, the auto power off will take eff ect in
approx. 2 min.
o
RC-6 or BR-E1 can also be used for movie recording (
=
322).
Remote Switch RS-60E3
Once connected to the camera, the switch enables you to shoot remotely
over a wired connection.
For operation procedures, refer to the RS-60E3 instruction manual.
1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.