Canon EOS 80D (W) Page 376 Instruction Manual Download

Page: 376 / 526

376

You can set protections to prevent the precious images from being
erased accidentally.

Select [Protect images].



Under the [

] tab, select [

Protect

images

], then press <

Select [Select images].



An image will be displayed.

Protect the image.



Turn the <

> dial to select the

image to be protected, then press
<



The image will be protected, and the
<

> icon will appear at the top of

the screen.



To cancel the image protection, press
<

> again. The <

> icon will

disappear.



To protect another image, repeat step
3.

Protecting Images

Protecting a Single Image

Image protect icon

Summary of Contents for EOS 80D (W)















































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands

Canon EOS 80D (W), Instruction Manual

Search results

Summary of Contents for EOS 80D (W)

Reviews:

Related manuals for EOS 80D (W)

Brands by name

Popular brands